Is Nikon D810 and Tamron 18-250mm F3.5-6.3 Di II BIM compatible?

Below you will find your chosen camera and lens. Click on the product name for more information.

Buy	Nikon D810 Released: 2014 Type: Digital SLR Sensor: FX (Full frame) 36 Megapixels 7360 x 4912 pixels
Buy	Tamron 18-250mm F3.5-6.3 Di II BIM Released: 2007 Superzoom Suited for cameras with APS-C sensors Focal Length: 18-250 mm Aperture: f/3,5-6,3

Can you combine these two?

Last updated: April 2024

This is the short answer:

The camera and lens you have chosen might work but in a cropped mode since the lens is constructed for a smaller APS-C sensor.

Cropped Mode and Lower Resolution

This lens has focal length:
18-250 mm

You will experience:
27-375 mm

Using a lens constructed for a APS-C sensor can result in that the resolution becomes lower that the 36 MP that the Nikon D810 has.

Focal Length

The Nikon camera has a sensor of type Full frame which means that your experienced Focal length will be same as the lens specification tells us.

This lens has focal length:
18-250 mm

Since Nikon D810 does not have a Full Frame sensor the experience focal length you will experience will be:
27-375 mm

Read more about Crop factor

Total weight

When you are looking at a combination of a camera and a lens you must always consider the total weight. Each product weighs in at:

Nikon D810
980 gram

Tamron 18-250mm F3.5-6.3 Di II BIM
430 gram

Together they have a total weight of 1410 gram (equal to 3.11 lb).

Compatibility Check ID: 2101

Want to buy these products?

If you want to buy these products, make sure to check out these links for best prices.
Any purchases made through these links will also help to support Lensora.com.